What is the Catalytic Oxidizer (RCO)?

Regenerative catalytic oxidizer operating at 300-400 degrees C with lower fuel consumption than RTO for medium VOC loads. It is manufactured by MUSI Technology in Changzhou, China, and shipped worldwide as a standalone unit or as part of a complete coating line.

What are the main specifications of the Catalytic Oxidizer (RCO)?

Standard specifications are: Air flow: 3,000 - 30,000 m³/h; VOCs DRE: ≥97%; Catalyst temperature: 250-400 °C; Catalyst type: Pt / Pd noble metal; Catalyst lifespan: 3-5 years; Heat recovery: ≥85%; Inlet concentration: 200-3,000 mg/m³. Figures outside these ranges are met with a custom-engineered build.

What performance does the Catalytic Oxidizer (RCO) deliver?

Rated performance is 3,000 - 30,000 m³/h. Actual output depends on part size, coating thickness, and the operating conditions of the plant.

What does the Catalytic Oxidizer (RCO) cost and how long is the lead time?

Price is quoted per project, because every unit is configured to the buyer requirements, parts and production volume. Standard configurations ship in 30-60 days with 12-24 months warranty. On-site installation, commissioning and operator training are available worldwide. M MUSI Technology SPRAY COATING SPECIALIST Changzhou MUSI Environmental Technology Co., Ltd. is a leading manufacturer of spray coating lines, dedicated to delivering efficient, eco-friendly and intelligent coating solutions to customers worldwide.

CATALYTIC OXIDIZER

Catalytic Oxidizer (RCO)

Name: Catalytic Oxidizer (RCO)
Brand: MUSI Technology

Noble metal catalysts oxidize VOCs to CO₂ and H₂O at 250-400 °C — significantly lower temperature and energy use compared to RTO incineration.

Best for medium airflow and medium concentration exhaust

Request Quote Call Us

Technical Specifications

The table below shows standard specifications. For custom requirements (non-standard size, specific heating method, robot integration, etc.), please contact MUSI engineers to confirm.

Air flow	3,000 - 30,000 m³/h
VOCs DRE	≥97%
Catalyst temperature	250-400 °C
Catalyst type	Pt / Pd noble metal
Catalyst lifespan	3-5 years
Heat recovery	≥85%
Inlet concentration	200-3,000 mg/m³

Product Features

Application-Specific Design — optimized for Best for medium airflow and medium concentration exhaust, avoiding mismatched capacity or wrong sizing.
Stable Operation — core components from imported or top-tier domestic brands (Siemens PLC, ABB drives, SEW motors). 100% factory testing pre-shipment.
Energy & Environment — heat recovery, VFD drives, and intelligent shutdown deliver 20%-30% energy savings versus conventional equipment.
Easy to Operate & Maintain — user-friendly HMI, standardized fault codes, and routine maintenance manageable by your in-house technicians.
Line Integration — seamlessly integrates with MUSI's pretreatment, curing, and environmental equipment for a complete production line.

Application References

This product has performed excellently in MUSI's customer installations. Selected references include:

Vietnam — Tier-1 automotive parts supplier: 600,000 pcs/year coating line, 4+ years stable operation with no major faults
UAE — Aluminum profile manufacturer: Replaced imported equipment, reduced energy use by 28%, saving ~$85K USD per year
Mexico — Hardware exporter: Two-shift operation, daily output up from 5,000 to 12,000 pcs, 99.5%+ film quality pass rate

More references in our Case Studies section.

Service & Warranty

Solution Design — free CAD line layout, process flow, and equipment list
Warranty — 12 months full machine, 36 months on critical components
Installation & Commissioning — engineers travel to your site for installation through production launch
Operator Training — 3-5 days of free training for operators and maintenance technicians
Response Time — 24-hour phone response, 72-hour on-site arrival (international)

Frequently Asked Questions

QWhat is the standard delivery lead time?

Standard models ship within 45 days from contract signing and down payment. Custom projects 60-75 days. Specifics confirmed in contract.

QHow do I choose between gas and electric heating?

Where natural gas is reliably available at competitive cost, gas heating typically reduces operating costs by 35%-50% compared to electric heating for continuous operation. Electric heating's advantages: zero local emissions, easy maintenance, lower upfront cost. The choice depends on your local energy prices and emission requirements.

QCan I visit MUSI's factory to see this equipment?

Absolutely. International visitors are warmly welcome at our Changzhou factory. We can show in-process equipment and videos of running customer installations. Book at least 1 day in advance — we provide pickup and engineer-led tours.