+86 181 5173 1332 lin@coating-spray.com
EN
PRODUCTS

Products

Complete spray coating lines & environmental treatment equipment

PRODUCT CATEGORIES

Our Product Lines

Coverage from pretreatment, spraying, and curing to environmental treatment — 30+ standard models meeting diverse industry and capacity needs.

Automatic Spray Coating Lines

Automatic Spray Coating Lines

Overhead chain, floor belt, and robotic flexible spray coating lines for high-volume automotive parts, appliance, and hardware production. Capacity ranges from 8,000 to 30,000 pieces per shift.

5 models View Category
Powder Coating Systems

Powder Coating Systems

Powder coating has become the leading method for hardware, appliance, and aluminum profile industries — eco-friendly (zero VOCs), excellent durability, superior mechanical properties. MUSI offers the full range from manual to fully automatic, single-color to multi-color quick-change systems.

5 models View Category
Liquid Spray Lines

Liquid Spray Lines

Liquid coatings (water-based, solvent-based, 2K paints) still dominate in automotive, furniture, and appliance exterior finishes. MUSI provides differentiated solutions tailored to each paint type's characteristics.

5 models View Category
Sandblasting & Shot Peening Systems

Sandblasting & Shot Peening Systems

High-efficiency surface preparation systems including wheel blast cabinets, hook-type shot blast machines, tumble belt blasters, and manual sandblasting cabinets. Removes oxide, rust, and contaminants for superior coating adhesion.

5 models View Category
Dust Collection Systems

Dust Collection Systems

Advanced dust and fume extraction with multi-stage filtration — pulse-jet baghouses, cartridge collectors, cyclones, wet scrubbers, and central extraction systems for safe, compliant workshops.

5 models View Category
VOCs & Environmental Equipment

VOCs & Environmental Equipment

With increasingly strict global air emission standards, VOCs treatment is now mandatory for coating facilities. MUSI provides complete environmental solutions covering exhaust collection, concentration, incineration, and compliant emission.

5 models View Category
TURNKEY LINES BY APPLICATION

Complete Lines Built for One Product Family

Where the finished part carries the specification — corrosion class, film tolerance, changeover time — the line is engineered around that product family rather than assembled from catalogue categories.

Energy storage container coating line with blast room and spray booth

Energy Storage Container Coating Line

Turnkey line for BESS enclosures and battery pack housings, blasting to Sa2.5 through weather-resistant topcoat.

ISO 12944 C4-C5MView Line
Shipping container coating line at a container manufacturing site

Shipping Container Coating Line

Production-rate marine coating for dry boxes and reefer cabinets, three-coat C5-M with forced curing.

1-4 boxes per dayView Line
Automotive coating line with robotic spray booth and overhead conveyor

Automotive Coating Line

Built to an audited specification with plus or minus 10 micron film control and batch-level process logging.

300-2,000 parts/hView Line
Metal hardware coating line with overhead chain conveyor

Metal Hardware Coating Line

Designed around variety: 10-25 minute colour change, dense racking, 95-98 percent powder utilisation.

6-12 coloursView Line
PROCESS FLOW

Typical Coating Process

MUSI provides complete line design — covering every step from workpiece loading to finished part packaging.

1

Pretreatment

Degreasing, derusting, phosphating, water rinse, drying

2

Spray Application

IR pre-heat → powder/liquid/UV spray

3

Curing

High-temp dust collection system / sandblasting

4

Cooling & Unload

Forced air cooling → automatic unloading

5

VOCs Treatment

Exhaust treatment → compliant discharge

SELECTION GUIDE

Equipment Selection Guide

Different paint types, workpieces, and capacity needs require different equipment configurations. Wrong choices lead to wasted investment or production bottlenecks.

Typical Scenario Recommended Solution
Hardware mass coating (≥5,000 pcs/shift) Overhead chain auto powder line + RTO treatment
Furniture panel water-based coating Floor belt water-based line + activated carbon + wastewater
Auto bumpers / complex plastic parts Robotic flexible line + 2K mixing spray
Aluminum profile outdoor weathering Vertical powder system + bridge gas oven
Surface preparation before coating (rust/oxide removal) Sandblasting + powder coating
High-volume low-concentration VOCs Zeolite rotor concentrator + RTO combined

Get Custom Selection Advice

Need a custom coating line for your factory?

Tell us about your workpieces and capacity requirements. Our engineers will provide a tailored solution and preliminary quotation within 24 hours.

Request a Quote

Six equipment families, and what each one is rated for

MUSI supplies the whole finishing shop rather than single machines. Coating lines run 0.5–5 m/min and scale from 5,000 to 50,000 pieces per shift over 60–200 m of installed length. Powder booths change colour in 5–15 minutes against 30–60 minutes for a standard booth. Electrostatic liquid spray reaches at least 80% transfer efficiency. Blast machines reach cleaning grade Sa 2.5–3 to ISO 8501. Dust collectors cover 3,000–200,000 m³/h, and RTO units destroy at least 98% of VOCs with heat recovery of at least 95%.

TypeTypical usePublished figures
Automatic coating linesOverhead chain, floor belt, reciprocator, robotic, modularConveyor 0.5–5 m/min; 5,000–50,000 pieces per shift; line length 60–200 m; film uniformity to ±3 µm on robotic lines
Powder coatingBooths, recovery, curing ovens, vertical linesGuns 60–100 kV, 2–16 configurable; colour change 5–15 min; cyclone plus cartridge dual-stage recovery
Liquid sprayWater-based, solvent, airless, electrostatic, 2KTransfer efficiency ≥80% electrostatic, ≥70% water-based, ≥65% airless; airless to 350 bar; 2K mixing 1:1 to 100:1
Sandblasting & shot peeningRotary table, hook, tumble belt, roller conveyor, cabinetCleaning grade Sa 2.5–3 (ISO 8501); 50–300 m²/h; hook load 500–3,000 kg; abrasive recovery ≥98%
Dust collectionPulse-jet bag filters, cartridge collectors, cyclonesAir volume 3,000–200,000 m³/h; filter area 100–3,000 m²; PTFE and nanofiber media
VOC & environmentalRTO, activated carbon, catalytic oxidation, scrubbersRTO destroys ≥98% of VOCs at 760–820 °C with ≥95% heat recovery; carbon adsorption ≥90%

Figures are the published specification ranges for each type. Final values are fixed during layout design against your part mix and takt time.

Technical guides