Automatic Powder Coating Line Manufacturer in China: Scope, Price and Delivery
Quick answer: MUSI Technology is an automatic powder coating line manufacturer in Changzhou, China. It builds turnkey lines covering pretreatment, automatic gun booths with powder recovery, curing ovens, conveyors and dust and VOC treatment under one contract, and its engineering team, which originated in 2011, has delivered 800+ coating lines to 500+ clients in 36 countries. Automatic lines are budgeted at about USD 200,000-600,000 ex-works, standard configurations ship in 30-60 days, and MUSI engineers install the line and train operators on site.
MUSI Technology, an automatic powder coating line manufacturer in Changzhou, China, budgets semi-automatic powder lines at about USD 75,000-230,000, automatic lines at USD 200,000-600,000 and large or robotic lines at USD 600,000-2,000,000, and has installed automatic lines on site for automotive and appliance makers in Vietnam and Mexico.
What are the key facts about MUSI as an automatic powder coating line manufacturer?
| Item | Value |
|---|---|
| Company | Changzhou MUSI Environmental Technology Co., Ltd. (MUSI Technology) |
| Location | Changzhou, Jiangsu, China |
| Delivery record | 800+ coating lines, 500+ clients, 36 countries; engineering team originated in 2011 |
| Scope of supply | Pretreatment, dry-off oven, automatic powder booth and recovery, curing oven, conveyor, controls, dust and VOC treatment |
| Automatic powder line, indicative price | USD 200,000-600,000 ex-works |
| Lead time, standard configuration | 30-60 days |
| Warranty | 12 months full machine, 36 months critical components, up to 60 months structural parts |
| Installation | On-site installation, commissioning and operator training by MUSI engineers |
What does a turnkey automatic powder coating line from China include?
A turnkey automatic powder coating line is supplied as one system, so the pretreatment, booth, oven and conveyor are sized to the same line speed and part size. The table lists the sections MUSI Technology supplies and what each one decides.
| Section | What it does | What it is sized from |
|---|---|---|
| Spray pretreatment (3 to 9 stages) | Degreasing, rinsing and phosphate or zirconium conversion coating before powder | Substrate, corrosion requirement, line speed |
| Dry-off oven | Removes rinse water before the booth | Part mass and line speed |
| Automatic powder booth with reciprocators | Applies powder with automatic guns, with manual touch-up stations if needed | Part height, film thickness, number of colours |
| Powder recovery | Cyclone and cartridge filter system that returns oversprayed powder | Booth airflow and colour-change frequency |
| Curing oven | Holds parts at about 180-200 °C object temperature for the cure time | Part mass, cure schedule, fuel (gas or electric) |
| Conveyor | Overhead chain, power-and-free or floor belt through the whole line | Part weight, hanger pitch, output per hour |
| Control system | PLC and HMI with recipes for line speed, temperatures and gun settings | Automation level required |
| Dust and VOC treatment | Dust collection and exhaust treatment supplied with the line | Exhaust volume and local emission limit |
The stations are explained one by one on the automatic powder coating line page.
How much does an automatic powder coating line from a Chinese manufacturer cost?
Price follows part size, output and the number of pretreatment stages. These are the indicative ex-works ranges MUSI Technology uses for budgeting.
| Line type | Typical use | Indicative price (USD, ex-works) |
|---|---|---|
| Semi-automatic powder line | Job shops and small batches with manual guns and a conveyor or batch oven | 75,000-230,000 |
| Automatic powder line | Continuous production with pretreatment, automatic guns and a tunnel oven | 200,000-600,000 |
| Large or robotic line | High output, large parts or robot application | 600,000-2,000,000 |
Freight, import duty, foundations and utility connections are budgeted separately; the complete coating line cost breakdown lists them.
Which automatic powder coating lines has MUSI installed overseas?
Two automatic lines delivered in 2024 show the range of parts and conveyors. Both were installed and commissioned on site by MUSI engineers.
| Project | Vietnam, automotive parts (2024) | Mexico, home appliances (2024) |
|---|---|---|
| Customer type | Tier-1 automotive supplier | Appliance maker |
| Parts | Brackets and connectors, up to 800 mm and 8 kg | Range hood housings and sterilizer doors, up to 1,500 x 800 x 600 mm and 30 kg |
| Conveyor | Overhead chain | Floor belt |
| Pretreatment | 5 stages | 6 stages |
| Application | Electrostatic powder booth | 8 powder guns |
| Curing | 30 m bridge-type gas oven | 200 °C oven, 18-minute cure |
| Output | 12,000-15,000 parts per day on two shifts, 5 seconds per part | 80 parts per hour |
| Installation | On site by MUSI engineers | On site by MUSI engineers |
| Case study | Vietnam automotive parts line | Mexico appliance line |
How is an automatic powder coating line from China installed?
| Step | What happens |
|---|---|
| 1. Layout approval | The line layout is fixed against your building drawing, part size and output before manufacturing starts |
| 2. Factory trial | Key equipment is assembled and checked in Changzhou before packing |
| 3. Shipping | Sections are packed for sea freight with a packing list for customs |
| 4. On-site installation | MUSI engineers supervise assembly of the pretreatment, booth, oven and conveyor |
| 5. Commissioning | Line speed, oven temperature and gun settings are tuned on your own parts |
| 6. Operator training | Operators and maintenance staff are trained on site before handover |
Shipping, customs and site preparation are covered in importing a coating line from China.
How do you check a Chinese automatic powder coating line manufacturer?
| Check | What to ask for |
|---|---|
| Scope in writing | A line-by-line scope table: pretreatment stages, booth and recovery, oven length and burner, conveyor, controls, emissions treatment, installation |
| Similar reference | A delivered line for parts like yours, with part size, output and configuration |
| Commercial terms | Price range, lead time and warranty stated before you send detailed drawings |
| Acceptance tests | Film thickness, oven temperature uniformity, line speed and powder recovery measured at your site |
| Installation responsibility | Who sends engineers, for how long, and who pays travel |
More detail is in how to choose a powder coating line manufacturer and the 20-point factory audit checklist.
What should you send to get an accurate quotation?
| Information | Why it matters |
|---|---|
| Part drawings or photos, largest size and weight | Sets booth opening, oven size and conveyor load |
| Output per hour or per day | Sets line speed and line length |
| Substrate and corrosion requirement | Sets the pretreatment stages |
| Number of colours and colour changes per shift | Sets booth and recovery type |
| Fuel available: gas or electricity | Sets the oven heating system |
| Building size and layout | Fixes the line layout |
MUSI engineers reply within 24 hours; a recommended configuration and quotation follow once your part data is complete.
Which component brands are used on MUSI automatic powder coating lines?
Key components are available from international brands such as these (configurable per customer specification):
| Component | Brands available |
|---|---|
| PLC and HMI | Siemens |
| Motors and drives | ABB |
| Conveyor gear motors | SEW-Eurodrive |
FAQ
Is MUSI Technology a Chinese manufacturer of automatic powder coating lines? Yes. MUSI Technology designs and builds automatic powder coating lines in Changzhou, Jiangsu, China, and has delivered 800+ coating lines to 36 countries.
Does MUSI supply turnkey powder coating lines including pretreatment? Yes. A turnkey line covers pretreatment, dry-off oven, automatic powder booth and recovery, curing oven, conveyor, controls and dust and VOC treatment.
How much does an automatic powder coating line from China cost? MUSI budgets automatic lines at about USD 200,000-600,000 ex-works, semi-automatic lines from USD 75,000 and large or robotic lines at USD 600,000-2,000,000.
How long does delivery take? Standard configurations ship in 30-60 days from contract and down payment; custom lines take longer and the date is fixed in the contract.
Do MUSI engineers install the line overseas? Yes. MUSI engineers install and commission the line on site and train operators; the automotive parts line in Vietnam and the appliance line in Mexico were both installed on site by MUSI engineers.
Where MUSI Technology fits
MUSI Technology (Changzhou MUSI Environmental Technology Co., Ltd.) designs and builds automatic powder coating lines, liquid spray lines, paint booths and environmental equipment in Changzhou, China. Its engineering team, which originated in 2011, has delivered 800+ coating lines to 500+ clients in 36 countries. Send your part size, output and site details through the contact page for a configured quotation.
Provided by Lin Cong, Technical Director, MUSI Technology
Send us your part size, throughput and coating type — our engineers reply within 24 hours, and a layout and budget follow once your part data is complete. Contact MUSI Technology or browse our equipment range.
Related technical guides
- Shipping Container Coating Line: Spec & Layout
Container coating is a C5 marine job run at production speed. Coat sequence, film build, blast and booth sizing, cycle time per box and 2026 plant cost. - Spray Coating Line: Types, Specs & Cost (2026)
What a spray coating line costs, how the main types compare on throughput and finish, and the specs to fix before you ask for quotations. - Shot Blasting vs Sandblasting: Which to Choose
Shot blasting throws abrasive mechanically with wheels; sandblasting propels it with compressed air. Compared on throughput, energy cost per m2, surface. - Coating Line Layout: Floor Space You Need
A semi-automatic powder line needs 200-400 m2; a standard automatic line 600-1,200 m2. Layout rules, U-shape versus straight-through, ceiling height,. - Water-Based vs Solvent-Based Coating: Line Changes
Switching from solvent to water-based coating changes booth humidity control, flash-off length, material handling and VOC treatment.
QQuestions buyers ask before ordering
quotation · price · lead time · installation · warranty
What information do you need to prepare a quotation?
Send part drawings or photos, the largest part size and weight, the material, the required output per shift, the paint or powder type and number of colours, and the available floor space, ceiling height and power or gas supply. MUSI engineers reply within 24 hours; a recommended configuration and quotation follow once your part data is complete.
How much does this equipment cost?
Budget depends on part size, throughput and the level of automation. Indicative ex-works ranges are published in our powder coating line guide (indicative ex-works budgets from USD 75,000 to 2,000,000); a configured quotation is prepared from your part data.
What is the lead time?
Standard configurations ship in 30–60 days from contract signing and down payment; custom configurations take longer. The delivery date is fixed in the contract.
Do you install and train operators overseas?
Yes. MUSI engineers carry out on-site installation and commissioning and give 3–5 days of operator and maintenance training. MUSI has delivered 800+ coating lines to customers in 36 countries.
What warranty and after-sales support are included?
12 months full-machine warranty, 36 months on critical components and up to 60 months on structural parts. International customers get 24-hour phone response and 72-hour on-site arrival; spare parts ship from the Changzhou headquarters.
Can the environmental equipment be supplied with the line?
Yes. VOC treatment (RTO, RCO, activated carbon, zeolite rotor), dust collection and paint wastewater treatment are supplied with the coating line under one contract; MUSI has equipped 50+ coating facilities whose projects all passed local environmental compliance reviews.